Automation & control systems · Houston, Texas

From concept sketch to commissioned asset.

DEEPERN LLC designs, builds and commissions automation systems for production facilities, with nearly 30 years of field experience in oil and gas. One team carries the job from P&ID through detail design, panel build, cause & effect validation and field startup, so the drawings you sign off on are the drawings that match the plant.

Field experienceNearly 30 years · oil & gas
PlatformsRockwell · Siemens · Ignition
NetworksEtherNet/IP
PanelsNEMA 4X, built to drawing

How a job runs

You watch the project fill in, discipline by discipline.

Six stages, one drawing set. Pick a stage to see the sheet we issue at that point, what goes out with it, and where the project stands.

Point at a tag on the sheet to read it.
Project status at this stage

Issued at this stage

    Representative drawing set and progress figures, drawn for this page. Not a client project.

    Capabilities

    Design, panel build and field work from one team.

    Most owners end up managing three vendors and the gaps between them. We hold the whole scope, which is why the as-builts come back complete.

    C-01

    Detail design & documentation

    P&IDs, single lines, instrument indexes, loop sheets and control narratives, issued as a coherent package rather than a folder of PDFs.

    P&ID · single line · loop sheets · as-builts
    C-02

    PLC, HMI & SCADA programming

    Structured, commented, version-controlled logic you own outright. Source code is handed over at turnover, every time.

    Rockwell · Siemens · Ignition · EtherNet/IP
    C-03

    Control panel design & build

    Control panels, MCCs and junction boxes built to drawing, rung out point to point and documented before shipment.

    NEMA 4X · point-to-point checkout
    C-04

    Instrumentation & field devices

    Specification, procurement support, installation detail and calibration for transmitters, analyzers, control valves and final elements.

    Transmitters · control valves · analyzers · calibration
    C-05

    Commissioning & interlock validation

    Cause & effect matrices, interlock validation and witnessed testing, carried through loop checks to start-up.

    Cause & effect · FAT protocol · loop checks
    C-06

    Legacy system migration

    Obsolete PLC and SCADA upgrades with documented point mapping and a cutover plan built around your shutdown window.

    Legacy PLC · SCADA upgrades · point mapping · cutover plan
    Open industrial control panel with PLC modules, terminal blocks and wiring
    Panel buildPhoto: Raymond Sime / Unsplash
    Process piping with manual valves in an industrial facility
    Field piping & valvesPhoto: Jahhid Fitrah Alamsyah / Unsplash
    Process plant structure with pipe racks against the sky
    Production facilityPhoto: Jakub Pabis / Unsplash

    For owners

    What an owner actually gets.

    01

    One accountable party

    Design, panel build and commissioning sit with the same team, so there is no seam for a problem to hide in.

    02

    Drawings that match the field

    As-builts are updated during commissioning, not six weeks after demobilization.

    03

    Your code, your license

    Source code, project files and documentation are handed over. No hostage logic, no annual key.

    Experience

    Three decades of startups behind every drawing.

    Every package we deliver carries nearly 30 years of commissioning, shutdowns and field call-outs in oil and gas. That is the difference between a drawing set that looks right and a plant that runs.

    Our founder holds TÜV Rheinland Functional Safety Engineer certification (IEC 61511).

    Contact

    Send us a P&ID and a problem.

    Budgetary estimates, a second opinion on an existing package, or a full turnkey scope. Tell us where the project stands and we will tell you what it takes to finish it.

    OfficeHouston, Texas, USA
    Phonepending confirmation
    Emailpending confirmation
    EntityDEEPERN LLC, Texas